
Kitchen Sinks
New benches, relocations and the leaks that start where the trap meets the waste: see kitchen sink installation.
The kitchen plumber Hendra owners ring is really an appliance-room plumber: someone for the bench, the sink and dishwasher on one side, and the trough and machine on the other. Hendra Same Day Plumbing covers both rooms across Hendra and the streets nearby, with a licensed plumber on every job and a fixed quote before work starts.
If we're late, $100 comes off your bill

Most homes here are detached houses from the racing decades and the postwar years. Their bench plumbing has been quietly at work for generations, so when something lets go, the fix usually starts under the cabinet.

Four parts run the plumbing in these rooms: supply in, waste out, a trap under each fixture, and the hook-ups for sink, dishwasher, trough and washing machine. Everything else on this page hangs off those four.
Under a standard kitchen bench, hot and cold lines each pass through an isolation valve before reaching the tap. The laundry mirrors it: a pair of wall taps feeds the machine, and the trough draws from its own set.
Water leaves the sink through the basket waste and the trap into the waste line. The trough drains the same way.
Each trap holds a water seal in its bend, and that seal is what keeps sewer smells out of the room.
Below ground, the private sanitary drain gathers every fixture's waste and runs it to the sewer connection. Urban Utilities looks after the public side; the pipes on your property are yours.
Even the toilet joins that same drain. What separates the fixtures is that each one traps water on the way through, which is why kitchen sinks and toilets can share it safely.

Only two small jobs in these rooms sit outside the licence rules: renewing a tap washer or jumper valve, and swapping the cartridge of a domestic water filter. The QBCC lists both as unregulated work, though the finished job must still meet the standard.
A householder who knows how can do either one. Past that line, the licence rules apply:
Age makes that line matter more here. Raceview Avenue's older houses were piped in galvanised steel when they went up, and where that steel survives in walls and under floors it rusts at the joints, showing up as weak flow at the kitchen tap. The lots near Gerler Road tell the same story.

An isolation valve shuts off one fixture on its own, and each appliance here has its own. Finding them before you need them turns a split hose into a quick valve turn rather than a mop-up.
a small valve on its supply line, usually behind or beside the machine.
the wall taps its hoses screw onto, hot and cold.
the valves under the bench, one on each supply line.
the shut-off at the water meter closes the whole property, clockwise, but check first that nothing, hot water system included, needs the flow kept on.
A braided hose under a trough can split mid-morning and run unnoticed all day while the household is out at work and school. Closing the right valve early is what keeps that story short.

Notifiable work is plumbing carried out in a standing dwelling: a council permit isn't needed, but the QBCC gets a Form 4 once the job wraps up. Kitchen renovations land there, and moving a fixture does too.
The Form 4 reaches the QBCC inside 10 business days, and you get a copy to keep with the house papers. If yours never arrives, the QBCC can supply it on request.
Two setups change the answer. Renovating a unit can require council sign-off, and an extra fixture where several lots share a drain is permit work, so flag the setup when you book.
Each job under this heading has a dedicated write-up, so start there for the detail.

New benches, relocations and the leaks that start where the trap meets the waste: see kitchen sink installation.

Connections, isolation valves and what changes when the machine moves: see dishwasher installation.

Braided hose replacement covers the hoses feeding these appliances, and leak detection finds the ones you can't see. A sink that won't drain is a blocked drains job.
$0 call-out fees, available 24/7, and same-day where we can.

Phone (07) 3523 7172 or fill in the form with what you're seeing in Hendra. The more we know, the better we can prepare.

We open the cabinet, check the supply valves, the trap and the waste, look at how the appliance hooks up, and confirm access before quoting. You see the full job, not just the symptom.

A fixed quote comes before any work starts: flat-rate pricing, no hidden fees, and your go-ahead first.

Card or EFTPOS on site when everything's working, or ask us about Fix now, pay later.

Calls in Hendra come with $0 call-out fees, and there's no added charge for nights, weekends or public holidays.
Flat-rate pricing with no hidden fees, set out in a fixed quote before any work starts.
Our labour carries a lifetime labour warranty, our Fix-It-or-It's-Free guarantee backs it (T&Cs apply), and if we're late, $100 comes off your bill.
We work under QBCC No: 15024607, licensed and insured, and every job is done by a licensed plumber.

Hendra Same Day Plumbing books kitchen and laundry jobs seven days, same-day where we can.
Book on (07) 3523 7172 for plumbing anywhere in Hendra. We're available 24/7, there's no extra charge for nights, weekends or public holidays, and every job comes with $0 call-out fees.
Current offers:
T&Cs apply. Mention this offer when booking.
The sink and its waste, the taps, the dishwasher connection, filter hook-ups and the laundry trough. We have dedicated pages for sinks and for dishwashers, and we describe the laundry connections in general terms.
Yes. Both can share the private sanitary drain below ground, because each fixture drains through a separate trap before joining it, and that drain runs everything to the sewer connection.
The trough, the machine's feed taps, and the drain line taking its water away. We keep to general terms on laundry connections and quote once we've seen them on site.
No. A kitchen renovation in an existing dwelling is notifiable work, so a council permit isn't needed; the Form 4 follows instead. Units and buildings on shared drains can differ, so flag the setup when you book.
At the joins: where the trap meets the waste, around the tap's base, at the supply connections and in an appliance hose. The detail sits on the sink, laundry and hose pages.
Whether anything moves or stays put, whether extra water or waste points get added, how easily we reach the pipework, and the fittings you pick. A fixed quote locks the figure once we've seen the job.